Accredited Calibration Services

Close filters
  •  
from to
No results were found for the filter!
Anemometer Calibration MEASNET – WindGuard Shop Anemometer calibration, MEASNET/IEC...
Calibration in accordance to MEASNET/ IEC 61400-50-1:2022, previously IEC 61400-12-1:2017, at a flow speed range of 4 to 16 m/s with 13 measurement points at a tilt angle of 0°. WindGuard has also established a fixed yaw orientation for each anemometer type to achieve high repeatability of measurement results. DAkkS / ILAC accredited calibration laboratory according to ISO...
From € 72.00 *
Calibration in accordance to EN 15518-3/EN15518-4 Calibration in accordance to EN 15518-3/EN15518-4
Calibration of sonic anemometer in accordance to EN 15518-4, consisting of two separate tests. Accredited calibration of the flow speed response of one anemometer. The device under test (DUT) is mounted perpendicular to the flow in the test section of the wind tunnel. The predefined orientation is aligned with the flow centerline. For each pre-defined test point according to...

Price on request

Calibration in accordance to EU Commission Regulation 2017/2400 Calibration in accordance to EU Commission...
The European Commission introduced an implementing Regulation (EU) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011. Part of this regulation is the...
€ 600.00 *
Classification of Anemometers - WindGuard Shop Classification of Anemometers
WindGuard is the leading expert in the classification of anemometers in accordance to IEC 61400-50-1:2022, previously IEC 61400-12-1:2017. The classification at WindGuard includes: - Standard MEASNET/ IEC 61400-50-1:2022, previously IEC 61400-12-1:2017 calibration of anemometers - Measurement of tilt angular response characteristics - Measurement of directional...

Price on request

Anemometer Calibration "Tilt response" - WindGuard Shop Tilt response calibration, IEC 61400-50-1:2022,...
The procedure for the calibration of tilt response is in accordance to IEC 61400-50-1:2022, previously IEC 61400-12-1:2017 . The wind sensor is slowly tilted between -30° and 30° at a fixed wind speed of approx. 8 m/s and a fixed yaw angle. The benefit of a continuous tilting is that the response of the sensor at any angle is considered. Therefore, with this approach,...
€ 150.00 *
Wind Direction Calibration - WindGuard Shop Wind Direction calibration, IEC...
During a Wind Direction calibration in accordance to the IEC 61400-50-1:2022, previously IEC 61400-12-1:2017 , the wind sensor is slowly yawed for a whole revolution and back at a fixed flow speed of approx. 8 m/s and a fixed tilt angle of 0°. A stepwise calibration is possible, but not suggested by WindGuard. A continuous yawing considers the response of the wind sensor for...
From € 150.00 *