Products from Deutsche WindGuard Wind Tunnel Services GmbH

Close filters
from to
2 From 2
No results were found for the filter!
Starting threshold Wind Vane - WindGuard Shop Starting threshold - Wind Vane
Wind tunnel measurements of starting threshold of wind vanes are performed in accordance to the ASTM D 5366 – 96. The starting threshold is determined by measuring the lowest speed at which the vane is moving from a 10° deflection to a...
€ 350.00 *
Anemometer Calibration "Tilt response" - WindGuard Shop Tilt response calibration, IEC 61400-12-1
The procedure for the calibration of tilt response is in accordance to IEC 61400-12-1. The wind sensor is slowly tilted between -30° and 30° at a fixed wind speed of approx. 8 m/s and fixed yaw angle. The benefit of a continuous tilting...
€ 150.00 *
Wind Direction Calibration - WindGuard Shop Wind Direction calibration, IEC 61400-12-1
During a Wind Direction calibration in accordance to the IEC 61400-12-1, the wind sensor is slowly yawed for a whole revolution and back at a fixed flow speed of approx. 8 m/s and a fixed tilt angle of 0°. A stepwise calibration is...
From € 150.00 *
2 From 2