Maintenance

    • Please consider: maintenance of anemometers performed by WindGuard always require a calibration afterwards as a part of our quality control process.
Please consider: maintenance of anemometers performed by WindGuard always require a calibration afterwards as a part of our quality control process. read more »
Close window
Maintenance
    • Please consider: maintenance of anemometers performed by WindGuard always require a calibration afterwards as a part of our quality control process.
Close filters
  •  
from to
No results were found for the filter!
Inspection Thies First Class Anemometer Type 4.335x.x0.xxx Inspection Thies First Class Anemometer Type...
The inspection of Thies First Class Anemometers includes a visual inspection of each part, a signal test, a measurement of spindle concentricity and a leakage test of the rotor. Depending on the inspection result the further work process will be discussed with the customer. Please consider: maintenance of anemometers performed by WindGuard always requires a calibration...
€ 20.00 *
Maintenance R. M. Young Propeller Anemometer Type 27106 Maintenance R. M. Young Propeller Anemometer...
The maintenance of a 27106 propeller anemometer includes a detailed inspection beforehand. The inspection includes a detailed visual inspection and a signal test. The maintenance will be immediately conducted in case of a damage-free anemometer. The maintenance includes the exchange of bearings and seals of the anemometer part only. If abnormalities or damages are detected...
€ 41.50 *
Maintenance R. M. Young Wind Monitor Maintenance R. M. Young Wind Monitor
The maintenance of a R. M. Young Wind Monitor includes an inspection with an operation test, exchange of the bearings and exchange of seals of the anemometer part only. If abnormalities or damages are detected the maintenance will not be carried out. In this case the customer will receive a detailed inspection report and a quotation that contains the additional costs for the...
€ 39.00 *
Maintenance Thies First Class Anemometer Type 4.335x.x0.xxx Maintenance Thies First Class Anemometer Type...
The maintenance of Thies First Class anemometers includes a detailed inspection beforehand. This includes beside the visuals inspection of each part also a signal test, the measurement of spindle concentricity and a leakage test of the rotor. Depending on the inspection result the further work process will be initiated. The maintenance will be immediately conducted in case...
€ 60.00 *
Maintenance Vaisala Anemometers WAAxxx Maintenance Vaisala Anemometers WAAxxx
The maintenance of a Vaisala WAAxx anemometer includes a visual inspection with an operation test, exchange of the bearings and exchange of seals. The maintenance will not be carried out directly if abnormalities or damages are detected. An inspection report documents any ascertained conspicuousness. Please consider: maintenance of anemometers performed by WindGuard always...
€ 130.50 *